Spengler Electronic AG

If you're faced with problems created by static charges and/or dust, you'll surely find the answer among our range of models in this field:

All of these units combine air flow with ionisation, so that the plus and minus electrons produced can be carried between 300 mm and 1800 mm to the object in question. Particularly in highly critical zones, electrostatically adhering dust is removed.

None of the equipment employs any ozone. Because to some extent all these units make use of the COANDA or VENTURI effects, they increase the flow rate of the incoming air by between 30 and 45 times.

Airmiser
In particular, the Airmiser can be used to remove chips produced when plastic parts are turned or sawed.

A further advantage of the Airmiser is that it can be attached to any conventional compressed air gun.

 

Ionizer

1. SR-Ionistator Typ SL
2. SR-Ionistator Typ 1
3. SR-Ionistator Typ 2		 4. SR-Ionistator Typ 3
5. SR-Ionistator Typ 4
6. SR-Ionistator Typ 4-EX

The novel design of the "SR IONIZER" enables several active fields to be produced with the same equipment so that any desired neutralization effect can be achieved. The fact that the polarity of the field produced by the radiator changes rapidly means that ions not used to neutralize interfering charges are automaticalIy eliminated.

Accurate measurements with a field-strength meter determine which type of equipment will be required; the equipment can be fitted to practically any machine. Our expert staff will be pleased to advise you without obligation on methods of eliminating production difficulties caused by electrostatic charges.